Commercial · Savannah, GA
Old concrete has to come out clean before new work can last. Quality Concrete Savannah has handled concrete demolition and removal in Savannah since 2017, from small patios to heavy reinforced slabs, with safe cutting, breaking, and haul-off.
A good demolition starts with prep so the surrounding area stays intact. We locate and mark utilities, irrigation, and drains, then protect edges, landscaping, and adjacent structures before any saw touches the slab. For controlled removal we use diamond blade saw-cutting to isolate sections, then break concrete with electric jackhammers or hydraulic breakers depending on thickness and reinforcement. Once the slab is up, we scrape and grade the subbase, remove soft spots, and leave a clean, compactable surface ready for new stone, forms, or asphalt transitions.
Savannah conditions matter because sandy soils, high moisture, and frequent rains can undermine slabs and bases. During demolition we watch for pumping, voids, and standing water, and we can recommend base corrections like geotextile fabric, #57 granite stone, or crusher run with proper compaction before replacement concrete goes back. If you are removing concrete to widen a driveway, re-slope a pad, or replace a sidewalk trip hazard, we also plan tie-ins and joints so the finished work drains correctly. When the project includes replacement, we coordinate finish details like broom-finish traction, tooled edges, and control joints to reduce random cracking.
Savannah customers choose us because we treat demolition as a precision trade, not just brute force. Our crew is licensed and insured, and we show up with the right equipment, from walk-behind saws for straight cuts to skid steers for loading and tight-site maneuvering. You get a written plan for what is being removed, what stays, and how we will protect nearby concrete, brick, and utilities. We keep the site organized, control dust and debris as conditions allow, and haul concrete to the proper disposal or recycling facilities.
On the final walkthrough we confirm elevations, edges, and access points so your next phase starts without surprises. We remove rubble, rebar, and mesh, then clean up loose material so contractors can set forms or lay base immediately. You receive a clear scope, disposal included, and a clean handoff surface, whether the goal is a new driveway, patio, dumpster pad, or equipment slab. If we are also installing new concrete, we can schedule the pour after base prep and compaction are verified.
Foot traffic is often possible after about 24-48 hours, but vehicle traffic typically needs more time. Actual timing depends on thickness, weather, and curing approach, and we will give you a project-specific schedule.
Yes. We can sawcut and remove old concrete, haul debris, and rebuild the base before the new pour. This is the best way to correct underlying settlement and drainage issues.
Common options include broom-finish for traction, smooth trowel where appropriate, exposed aggregate, and light decorative borders. We will recommend finishes based on slip resistance, appearance goals, and maintenance.
Yes. We build slabs with planned thickness, reinforcement, and anchor locations as needed for sheds, workshops, and light commercial structures. We also check grade and drainage so water does not pond at the building.
Yes. We provide a free written estimate that outlines demo (if needed), base prep, reinforcement, concrete placement, finishing, joints, curing, and cleanup so you can compare apples to apples.
Concrete demolition is more than breaking up a slab. Done right, it protects nearby structures, prevents damage to utilities, and leaves a stable subgrade for whatever comes next. Quality Concrete Savannah provides full-service concrete demolition and removal in Savannah, including saw-cutting, breaking, loading, and haul-off for residential and commercial sites.
Most projects start with an evaluation of slab thickness, reinforcement, access, and what borders the concrete, such as brick edging, foundations, pool decks, or asphalt. We isolate sections with diamond saw cuts, then use jackhammers or hydraulic breakers to lift the concrete in manageable pieces. For thicker pads and commercial work, controlled sectioning reduces vibration and helps avoid collateral cracking. Materials are loaded, hauled, and disposed of properly, and metal reinforcement is separated as needed.
After removal, the real value is in the surface we leave behind. We scrape out loose material, identify soft subgrade, and can recommend base repairs before new work. Depending on your plan, that may mean adding geotextile fabric, placing #57 stone or crusher run, and preparing for compaction with a plate compactor. If replacement concrete is part of the scope, we can coordinate grades, drainage slope, and tie-ins so the new slab performs better than the one that failed.
If you need concrete demolition for a driveway, patio, sidewalk, shed pad, or commercial flatwork, we will provide a written estimate and a schedule that matches your timeline. The goal is simple: safe removal, clean edges, and a site that is ready for the next trade or the next pour.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Savannah. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
